home16

An Initial Introduction To Interior Architecture

Interior architecture can be seen as different from architecture in that the interior rooms, halls, doorways + stairs can be re designed once the initial design for the architecture of the building as a whole is in place. Interior architecture can be used to completely re design, for example a room such as a kitchen, bathroom in a family home which is quite common or a meeting room or office layout in a business environment or modify the existing design based on original architecture.

The interior architecture of a building can be changed for many reasons, either practical, where the interior of a building is going to be used for a new purpose or due to changing fashions or updated technologies. Examples of this are very common in many towns and cities where the exterior of a building is in a style of when it was built, say in the late 19th century but it’s interior has been completely re vamped incorporating modern design fashions and the latest technology.

The use of interior architecture means that for many buildings over a hundred years old the development of the look and design of their interior and exterior could often be the work of many different architects or teams of architects. This has meant for many of our towns and cities the architecture on view can be widely varied and reflect many different periods of time, design fashions and architecture styles. Some of which can be seen as timeless whilst others from certain eras can be seen as garish and bad taste 20 – 30 years down the line.

However no matter what a buildings exterior may look like with the help of interior architects, refurbishment and fit out specialists the interior look and feel of many buildings can be totally transformed with enough time and money bringing them up to date, that is until the latest style, fashion and technologies need integrating a few years down the line.

The main thing to differentiate architecture + interior architecture is that an architect is concerned with the concept of designing a new building the interior architect is concerned with the modification of existing buildings, some of which the design can be seen as timeless and look good for centuries whilst other will be an eye saw and look dated within 10 – 30 years.

This is quite a large and interesting topic, for further reading would advise looking at books + articles, online, in bookshops, news agents or in libraries on architecture, design + interior design.
415 Words

home5

Overview Of Ibm Service Oriented Architecture (soa) Fundamentals Certification

The increasing need for SOA can be complex for companies looking to use experienced IT professionals with SOA capabilities. Several contemporary IT workers do not have experience with the engineering that are the foundation for an SOA. This capabilities gap can slowly down and delay deployments among all but the most forward companies. Quickly creating capabilities is a need to keep rate with the opponents.

IBM WebSphere Details allows you get going easily via IBMs Web-based exercising series. Taken as a whole, the series provides a company foundation for recognizing, evaluating, and indicating your company’s SOA needs.

Test 000-669 – Exam Info
The exam includes six areas containing a complete of roughly 54 multiple-choice concerns. The rates after each area name indicate the estimated submission of the complete query set across the areas.

Area 1 – The Value of SOA (15%)
A.Identify company functions where SOA can enhance competition and efficiency.
B.Identify how SOA can offer revenue (ROI) (improve competition, website, improve responsiveness.)

C.Identify the SOA functions that make companies more nimble.
D.Identify the chance expenses of not implementing SOA.
E.Identify circumstances where SOA does not offer the preferred value or is not appropriate.
F.Identify the company individuals for SOA.

Area 2 – SOA Principles (26%)
A.Define the idea of assistance in SOA.
B.Describe the structural concepts used in SOA (for example: decrease combining and separating of issues.)

C.Describe the tasks that XML performs in SOA.
D.Describe the aspect of an assistance computer pc personal computer system operating system and/or database in SOA.

Area 3 – Primary SOA Structure (20%)
A.Describe you will of a simple SOA architecture.
B.Describe the components of the IBM SOA Referrals Structure, and their tasks and connections.

C.Describe the business assistance bus (ESB) and its aspect in SOA.
Area 4 – SOA Control (19%)
A.Explain the need for SOA government.

B.Describe SOA government and relevant concepts (roles and obligations, financing designs, guidelines, administration, crucial achievements aspects, and analytics.)

C.Describe Excellent of Service (QoS) problems relevant to SOA.
D.Explain the need for an allocated protection design (including problems like recognize provisioning and reproduction.)

E.Identify the effect of changes to solutions in the SOA lifecycle (change management, versioning, and assistance lifecycle.)
Area 5 – Preparing for SOA (20%)
A.Describe the components of SOA government that need to be resolved during the look for SOA.

B.Understand the value of saving company problems, individuals and goals when preparing for SOA.
C.Capture and assess IT problems, individuals, and goals (including analytics and KPIs.)

D.Describe the individuals, business, and technological innovation aspects that effect preparedness for SOA and its achievements.
To get prepared for Examination 000-669, it is first recommended that you are familiar with the job aspect information and the aspects this credentials is according to, as well as have knowing of the topics described in examine objectives/skills determined on exam.

Evaluate your own specialized stage to examine goals and the recommended exercising resources, and then determine for yourself how much planning you require

images9

Implement SaaS architecture to improve organizational storage space

These days, organizations are growing rapidly with outstanding performance and productivity. Data is also increasing along with this business improvement. This data includes; finance details, human resource details, requirement and project details and many more. Applications, hardware resources, software programs, operating systems and many more are also considered important information. It is important for every organization to store and maintain this crucial data for longer years. Data storage is the main problem for all IT organizations, as it takes much storage space to save and maintain the data in a device. Usually, servers are used as the main storage devices to maintain the information for future references. But, these servers have the limited capacity and cannot afford large amount of information. Due to this, IT organizations have developed several technologies and applications to enhance the storage efficiency in business enterprises. Cloud technology is one, which provides computing service through internet. Cloud computing is the latest service provided for all industries to enhance their business performance with various services like infrastructure as a service (IaaS), platform as a service (PaaS) and software as a service (SaaS). All these services can help the organizations to get several business solutions. SaaS architecture is the one that provides storage services for the enterprises. It is defined as a deployed software as a service program with a business IT structure and set up. In this architecture service, SaaS also described as storage as a service as it helps the organizations in maintain the important information for further references. Inefficient software programs linking can lead to less efficiency of growth and greater loss of cost; hence, SaaS architecture is important for many business industries. It can provide best profits with great customer service and remote access for various applications and tools to enhancing the business more effectively. It can save the operational costs by reducing the other physical resources as it can save the data in their internet databases. It is more effective to perform IT operations and specialized services to help the enterprises in several aspects to increase the profit margins. It also enables web services to provide various solutions through online using network connections. SaaS is cost effective solution as it is provided by the third party vendors or it can also be paid according to the usage. Hence, most of the small organizations are planning to implement these architectures to enhance their business performances and productivity.

>

For more information on SaaS architecture

images18

Multisynth-based Architecture

Traditional clock generators use a simple integer-N phased-locked loop (PLL)-based architecture. The output clock frequency is a function of the input clock frequency and the PLL divider values as shown in the equation
Equation: fOUT = fIN.N/P.R
Traditional single PLL-based IC solutions are suitable for simple integer clock multiplication of reference inputs or clock generation from crystal inputs. However, many applications require clock generation of multiple non-integer-related frequencies (e.g., 125 MHz Ethernet and 106.25llMHz Fibre Channel). Traditional solutions require that the crystal frequency be changed to support each unique frequency plan. This forces the designer to use one or more custom crystals and multiple clock generator ICs to generate the required set of frequencies, increasing the cost, complexity and power consumption of the overall solution.

New Any-Rate Clock Multiplier Architecture Simplifies Design
Recent advances in mixed-signal analog design have made it possible to provide any-rate frequency synthesis from a single device. Silicon Labs newest clock architecture leverages a fractional-N PLL used in concert with a low-jitter fractional divider termed MultiSynth to produce any-rate frequency synthesis on multiple output clocks. The flagship of this new product family is the Si5338 Any-Rate, Any-Output Quad Clock Generator. This technology dramatically simplifies timing architectures by integrating the frequency synthesis capability of four PLLs in a single device, greatly reducing size and power requirements compared to traditional solutions.

MultiSynth Technology
The Si5338s low phase noise, high-frequency VCO supplies a high-frequency output clock to the MultiSynth block on each of the four independent output paths. The first stage of the MultiSynth architecture is a fractional-N divider, which switches seamlessly between the two closest integer divider values to produce the exact output clock frequency with 0 ppm error. To eliminate phase error generated by this process, the MultiSynth calculates the relative phase difference between the clock produced by the fractional-N divider and the desired output clock and dynamically adjusts the phase to match the ideal clock waveform. This novel approach makes it possible to generate any output clock frequency without sacrificing jitter performance. Based on this architecture, each output clock can be individually programmed to generate any frequency from 0.16 to 350 MHz, and select frequencies to 700 MHz. Typical jitter performance enabled by this MultiSynth-based architecture is 1 ps RMS.

home18

Drafting And Architecture Training

Are you seeking drafting and architecture training? If so, you must understand that in order to become a legal, practicing architect in the United States, you are required to follow a specific educational path, and be licensed.

To attain a professional license, future architects must first attain professional drafting and architecture training from a qualified school. Upon successful graduation, candidates are required to participate in an internship to continue their drafting and architecture training. After that, the student may go on to taking the Architect Registration Examination (ARE) and must receive passing scores on all divisions.

If you are wondering what drafting and architecture training really consists of, the coursework will generally include related subjects such as architectural history, theory, building design, construction techniques, liberal arts, math, physical sciences, professional practice, arts and design, and computer aided drafting (CAD).

If you are serious about a career in drafting and architecture, then a vocational school or community college is a good place to gain your footing. Most employers are seeking experienced and well-educated candidates, so it is important to obtain a solid background in academics and technologies suited for the dual career. Drafting and architecture training that can be transferred to a 4-year college can be used as a stepping stone to a Bachelor Degree in Architecture and Drafting. Some vocational schools offer comprehensive technical training that will lead to a certificate or diploma of completion; others may offer an Associate Degree.

Aspiring professionals who have completed their vocational drafting and architecture training, and have successfully met all requirements of licensure, may earn anywhere from $25,000 to nearly $100,000 per year, depending on combined education and experience.

If you would like to learn more about Drafting and Architecture Training and Drafting and Architecture Schools, or even Online Drafting and Architecture Schools, you can find more in-depth information and resources on our website.

DISCLAIMER: Above is a GENERAL OVERVIEW and may or may not reflect specific practices, courses and/or services associated with ANY ONE particular school(s) that is or is not advertised on our website.

Copyright 2007 – All rights reserved by Media Positive Communications, Inc.

Notice: Publishers are free to use this article on an ezine or website, provided the article is reprinted in its entirety, including copyright and disclaimer, and ALL links remain intact and active.

home8

Creating A Web Site With A Search Engine Optimized Architecture

A web sites architecture is what grounds all future search engine marketing efforts. An optimal web site architecture facilitates a search engine in traversing
and understanding the site. Therefore, creating a web site with a search engine optimized architecture is a major contributing factor in achieving and maintaining high search engine rankings.
Architecture should also be considered throughout a web sites lifetime by the web site developer, alongside other factors such as aesthetics and usability. If a new feature does not permit a search engine to
access the content, hinders it, or confuses it, the effects of good content may be reduced substantially.For example, a web site that uses Flash or AJAX technologies inappropriately may obscure the majority
of its content from a search engine.

Optimizing a sites architecture frequently involves tinkering with variables that also affect usability and the overall user perception of your site. When we encounter such situations, we alert you to why
these certain choices were made. Sometimes we find that SEO enhancements run counter to usability. Likewise, not all designs that are user friendly are search engine friendly. Either
way, a compromise must be struck to satisfy both kinds of visitors users and search engines.

One common misconception is that search engine optimization efforts can be made after a web site is launched. This is frequently incorrect. Whenever possible, a web site can and should be designed to be
search engine friendly as a fundamental concern.Unfortunately, when a preexisting web site is designed in a way that poses problems for search engines,search engine optimization can become a much larger task. If a web site has to be redesigned, or partially
redesigned, the migration process frequently necessitates special technical considerations. For example,old URLs must be properly redirected to new ones with similar relevant content.

images20

Architecture meets Industrial Design

Title: Architecture meets Industrial Design

Text & Photography: Foster + Partners

Blurring the lines between architecture, interior design and industrial design, F+P once again prove that design is seamless and universal

Foster+Partners has proved its design prowess beyond the building industry and carries it forward to designing the interiors and furnishings for a commercial aircraft, drawing on its previous commissions for yachts and private jets.

Following the successful refurbishment of The Wing, Cathay Pacific’s flagship lounge at Hong Kong International Airport, the practice has carried the lounge’s sophisticated design into the first class cabin of the Boeing 777-300ER fleet refreshing the award-winning cabin.

The Wing, which opened earlier this year,is the second in a series of lounges by Foster + Partners for Cathay Pacific at HongKong International Airport. Every detail of the interiors,from the Champagne Bar to the bathroom fittings in the luxurious first class -cabanas’, has been custom-designed by the practice to create an exceptional experience for guests.

Besides the plush interiors, the lounges are furnished with a number of unique pieces designed by Foster + Partners, including a marble reception desk,food counter and a free-standing champagne bar with integrated trays – down to the detail of porcelain plates. Alongside the bespoke products and one-off furniture pieces, The Wing also features the Ilium cylindrical table light, developed with Nemo and the Foster 503 armchair by Walter Knoll.The highlight is the Cathay Solus Chair, the airline’s signature developed with Poltrona Frau that responds to the desire for privacy in the midst of a busy public space with its hourglass form and multi-utility constitution: the circular form incorporates a wide,comfortable seat, an integrated a power supply and a table, which can be used as an informal desk. The ribs of cushion at the back of the chair extend in places to form ridges, which can be used as armrests.

Creating a seamless experience for passengers, the cabin’s design shares the lounge’s palette of warm white leather,reflective dark grey surfaces and walnut finishes to create a calm, understated interior. Every element is considered and refined, including the stitch of the bespoke covers for Cathay Pacific’s celebrated first class seat, the handmade woollen carpet, the refurbished bathrooms and the new reading light, which has been custom-designed to cast fewer shadows when working or dining.

to view images click on globalhop.indiaartndesign.com

home13

Storytelling through Architecture

By Marina Correa Photography: Philippe Ruault; courtesy the architects

The Giraffe Childcare Centre designed by Hondelatte Laporte Architects introduces a dollop of fantasy into the routine lives of suburban Parisian townsfolk-

Niched between a towering structure, next to a neighbourhood built in the 70s and a newly constructed area, it was imperative that the healthcare centre did not -get lost’ within the urban landscape – hence the building is composed of three tiers and each is identified by a unique concrete animal sculpture.

The facades of the building are made out of white corrugated iron that provides a minimal background to the animal sculptures.

Interestingly, each of the south-facing playgrounds is in continuity with the interior spaces; while the urban landscape is animated using a child’s imagination. The wild animal sculptures appropriate a space: a giraffe appears to be peacefully eating the leaves of the trees from the neighbouring park; a polar bear tries to clamber up the steps, while a family of ladybirds climbs the faade in an attempt to reach the interior patio.

Architecture turns into storytelling. The building changes its identity and becomes a landscape in its own right; a metaphor for the urban jungle. The animals and the trees link the building to nature and motion.

Besides infusing a playful and poetic element, this building has also been awarded a green, zero energy efficiency label, making it not just aesthetically appeasing but also one that respects its environment.

Becoming a prominent landmark for the nursery, the affable animal forms transport us to a make-believe world. When pondered upon, definitely a project that goes way beyond the surface to attribute human characteristics and ethos to the emotional, functional routine of a child daycare centre.

to view images click on globalhop.indiaartndesign.com

images8

Architecture Of Yesteryears

Shingle style architecture is an innovative form of Queen Anne and it was originated in America during the last two decades of 19th century.This name was given by Vincent Scully, a historian of building architecture.Among the various structures in America that are constructed in this style, The Hotel del Coronado in San Diego is considered as the biggest.The houses that are built in this style are horizontal structures built up on a stone laid foundation.The asymmetrical designs and irregular construction make the building process highly complicated and as a result the cost of construction was far beyond the affordable range for common people.Thus it was considered as a luxury homes design. The roofs are more complex in this type of architecture. Many of such houses have gabled roofs with a tower in the front. A few houses have roofs that are hipped. In the gambrel form of roofs, the third storey of the building will be hidden in the roof so that the building will appear as a two storeyed building. The roof shingles and wall shingles will be in different colors. Most of the houses have towers and if a building is without tower, a part of its wall will be bulged out.

This type of architecture has the provision for more numbers of big and small windows. The windows are mostly double-hung with a single sash below and multiple sashes above. For huge walls, the windows will be in 2, 3 or more rows and there are various designs for the windows. In the most complex designs, large windows are kept in bays with 1, 2 or 3 stories. The more stylish windows will be in square, rectangular or circular shapes.Entrance with spacious porch is characteristic of this architecture.People used to relax in the porches which are supported by balusters, columns or stone supports.

The modern houses that are built in Shingle style architecture offer a host of distinctive features including natural surroundings, energy efficiency and healthy indoor atmosphere. These houses demonstrate how wood, stone and sunlight can be utilized to provide a healthy shelter.There are many holiday homes that are built in this style of architecture. Many wealthy people have constructed this type of homes at famous resorts and also at sea-side plots. Natural colors, exterior covered by wooden shingles and an asymmetric structure are the basic features of this architectural form. The other common features are big porches, irregular roofs, towers, verandas, asymmetric floors, chimneys, huge staircases and fireplaces etc.

Are you looking for Shingle style architects and luxury vacation homes, vanbrouck is the best choice. It is highly recommended from both a design and value standpoint when we were looking to home designs and build our dream home. For more information about Shingle style architecture please visit us.

images6

Traditional Breakfast, Lunch, Dinner And Architecture In Taiwan

Meal cult is an important part of countrys culture. Food and drink are the main necessities for sustaining life, and Taiwan cuisine takes a special place among the great cuisines of the world. Taiwan has a broad variety of dishes because of great ethnic diversity. The diversity of cuisines contains 8 principle types: Hoklo (or Taiwanese), Hakka, vegetarian cuisine, northern style cuisine, Hunan, Jiangzhe, Hong Kong, and Sichuan. Seafood is used in all these cuisines as a culinary culture of Taiwan that is simple and light.

In Taiwan people prefer to drink tea or coffee with some sandwiches for breakfast. They like fruits and sweets which are laid in a big plate on the table. For example, when the time for lunch comes, people eat salty dishes such as steamed and chopped chicken, steamed streaky pork with dry mustard cabbage, or dried mustard greens. Besides, they like rice with boiled eggs or fried potatoes with meat or fish. In Taiwan people have hundreds of receipts of dishes with rice and fish. Traditionally, Chinese dinner is laid at the round table in the center of which there is a flat circle on a revolving stand. It is necessary to point out that meals are served on big plates and are put in required amount on small plates by a person. At first cold snack is served, then time comes for hot dishes and only after these dishes the so called principle dishes are served.

In Taiwan people like to eat dishes with rice, meat and fish. In the end of dinner a soup or a broth is served. There is no dessert fruits and sweets are on the table during all the dinner and they are very often used in the principle dish (Bates 2005). Consequently, Taiwan cuisine represents one face by which a country is famous for. Traditional breakfast, lunch, and dinner in Taiwan are similar to breakfast, lunch, and dinner in Europe; however, there are some details you should know about Taiwan cuisine.

Taiwanese architecture is composed of variety of styles. The old traditional architectural model of houses in Taiwan still exists here. However, traditional architectural features of Taiwanese style become unimportant when entertaining and commercial institutions, such as shops and theaters, are built. We should emphasize that modern Taiwanese architecture unites traditional Taiwanese and European architecture styles. There appear buildings in European style, such as buildings of foreign consulates, foreign concessions, banks, hotels and clubs in big cities.